Less interruption from a slipped belt
The design aims to stay seated through ordinary turns; no ROLA Mini trial has yet shown a reduction in derailments.
In concept stage · Not yet for sale
TreadHold / For Enabot ROLA Mini ↗
Keep your pet camera rolling when its track slips.
TreadHold is a proposed pair of replacement rubber tracks measured for Enabot ROLA Mini. The design goal is to keep each belt seated through ordinary turns and suitable floor transitions, so the robot is less likely to stop moving while you are away. This is an unbuilt concept, not for sale.
- Designed around the ROLA Mini wheel
- Aimed at repeat track slip-offs
- Keep your original removable wheels
Free to join. No payment or commitment to buy.
Target price: $22 USD per pairFinal price and availability have not been set.
Sound familiar?
A camera on wheels is no help when a track comes off.
You steer ROLA Mini toward your pet, then the picture stops moving. If a rubber track has slipped off, someone at home has to refit it before you can drive again. A new original track or a cleaned wheel may be all you need; TreadHold would matter only if that does not solve the repeat problem.
A future model-matched replacement pair could use a measured inner guide and carefully chosen belt tension to stay centered on the existing removable wheels. It would be a simple track swap, with no changes to the camera, app or charging system. Fit and effectiveness still need real ROLA Mini testing.
Would this help your setup? →Designed with your day in mind
A track swap designed around the moment you need mobility.
These are design goals for a future ROLA Mini accessory. No retention improvement has been demonstrated.
Keep the original wheel assembly
A belt-only swap is intended to preserve Enabot's removable wheels and the familiar cleaning routine, subject to fit testing.
A clearer choice than guessing EBO parts
The concept would be measured for ROLA Mini specifically. Compatibility across Enabot robots is not assumed.
Picture the routine
Keep the robot you have. Test a better-seated track.
Here is how the proposed design would fit into your day.
- 01
Check the current ROLA Mini wheels and original tracks for debris, damage and correct seating; try an official replacement when appropriate.
- 02
If repeat slip remains, a future TreadHold pair would replace only the rubber belts on measured compatible ROLA Mini wheels.
- 03
Drive on suitable floors and watch whether the tracks stay seated. The product would not change the robot's obstacle limits, manual steering or pet-chewing risks.
Help shape TreadHold
Tell us where your ROLA Mini loses a track.
Does a ROLA Mini track repeatedly slip off on a suitable floor, even after cleaning or replacing it? Join the interest list and tell us when it happens. There is no payment, reservation or promised launch.
Target price: $22 USD per pairNo payment today. Tell us what you think of this price below.
An unbuilt concept from HomeRobotHQ. No launch date or production commitment yet.
Before you join
A few things you might be wondering.
Want to explore the evidence or build something like this?
Read the Enabot ROLA Mini product idea report ↗Will TreadHold let ROLA Mini drive over thick rugs or stairs?
No. Enabot states a 10 mm obstacle-crossing limit and a 15-degree slope limit. This concept is about track seating during ordinary use, not extending the robot's rated mobility or adding fall prevention.
Should I try an original replacement first?
Yes. Clean and reseat the existing wheel and track, and consider Enabot's exact-model original track pair or wheel set. If those fix the problem, a redesigned track has no clear advantage. Availability varies by seller and region.
Is it safe for pets that chew on the robot?
No chew-resistant claim is made. A bitten or detached elastomer track can be a pet hazard. Keep the robot and any loose parts away from pets that chew them and follow the robot's safety guidance.
Does it fit EBO Air or other Enabot robots?
No cross-model compatibility is claimed. ROLA Mini has its own track and wheel dimensions. Actual ROLA Mini revisions must be measured before fit can be promised.
Can I buy it now, and is Enabot making it?
No. TreadHold is an independent, unbuilt HomeRobotHQ concept, not for sale or endorsed by Enabot. Joining the interest list is free and does not commit you to buy.
What still needs to be tested?
- TreadHold is an independent unbuilt concept, not sold or endorsed by Enabot. No exact fit, safer pet use or improved retention has been demonstrated.
- It would not fix broken wheels, Wi-Fi interruptions, pet chewing, high-pile carpet, stairs or movement beyond Enabot's obstacle and slope limits.
- A new original track may be cheaper and sufficient. Final material, manufacturing, compatibility, price and availability are undecided; no robot or wheels are included.